How To

Teeth Whitening Instructions for Light Kit

 

STEP1:  THERMOFORMING TRAYS

PREFITTING PROCEDURE Place one tray in your mouth placing on your upper teeth. Practice sucking the air from the tray. This is the procedure you will use when you retrieve the trays from the boiling water to contour the tray to the inside surface of your teeth. Do the same procedure with the other tray with your lower teeth.

BOILING WATER Boil a pan of water. Remove the water from the heat. Place the tray in the hot water by the tab. Leave in water for 3-4 seconds.

Helpful Hints for Thermo Forming Trays

          Set water on to boil

          Remove from the burner

          Take one mouth tray by the tab and hold the tray in hot water for 5 sec

          Don’t swish it around

          Take out and gently tip off any water

          Don’t shake water off

          Put in your mouth quickly (it won’t burn)

          Suck out all the air

          Repeat this process for the second mouth tray

          (do one upper and one lower)

FITTING THE TRAY Lift the tray from the water using the tab. Quickly place the tray around the teeth and perform the same sucking procedure as practiced with the prefitting procedure.

NOTE: Being this is 36% you need to avoid gel contact with the soft tissue (gums). Take small scissors and/or nail clippers and trim your trays on the gingival line (teeth/gum line).

 

STEP 2:  BLEACHING PROCEDURE

Expiration date 04/2010   Batch # 001019374

Brush and floss teeth. Place a small drop of gel per tooth in the frontal portion of the tray for the front 6-8 teeth (approximately 1/4 cc). This will be the teeth exposed when smiling. Be careful not to overload the tray. Place tray in your mouth for approximately 15 – 30 minutes. Make sure you wipe away the access gel that may be exposed to the gums outside of the tray. Repeat process daily until desired results are accomplished. If you have any gum or tissue irritation, trim back the trays very slightly with tiny scissors. If sensitivity continues, discontinue use for 2-4 days. Remove tray, rinse, brush teeth. Clean the trays with cold water before and after each treatment.

DO NOT USE IF: pregnant/nursing, poor dental health (decayed teeth, exposed roots, gum disease, wear braces, recent oral surgery, jaw problems). At-home treatments have risks involved and you should consult your dentist. Some people will experience reversible tooth sensitivity and gum irritation. This will disappear: 1. Within a few days after discontinuing use 2. Decreasing the time you bleach your teeth 3. Increasing the amount of time between bleaching sessions.                              

The manufacturer and seller accept no responsibility for any usage of this product

 

STEP 3:  WHITENING LIGHT

After you have completed step one and step two you are ready for the teeth whitening process.

Insert your mouth trays with the gel in them. Place your lips over the clear plastic mouthpiece and turn on your light by pressing the white button  .For first time users, we recommend that you do a 30-minute treatment. For follow up treatments you will probably only need to use your light for 10 or 20 minutes to receive the desired results.

Twist battery cover counterclockwise until battery cover is aligned with ton light unit. Pull and remove cover.

Insert both batteries + side up. Replace battery cover and turn clockwise until on cover is aligned with ton light unit

 

STEP 4:  REMINERALIZING GEL

Place a small amount of gel in each indentation of your tooth tray. Let the tray remain in your mouth for 5 minutes. Perform treatment 3 times per week; more often is sensitivity is an issue.